This is the correct firmware for the Unifi AC Mesh I have only
tested at Unifi AC Mesh and not at Unifi AC lite But my information
is, that both have the same Hardware

Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

We need the new tunneldigger because the old broker no longer works with the current kernel.

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>

Since we change only the network part of uci, we only need to
commit this part and not the whole config five times.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

We do not use encrypted tunnels, so we can use urandom generating the keys to prevent blocking due to low entropy.

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This includes the new options introduced due to the
/etc/config/fff file into the WebUI.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Update notification is enabled by default. If required, this
allows disabling it permanently.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This implements an upgrade safe solution for the PoE passthrough
on multiple devices. Since LEDE already provides the relevant
settings, a check whether those are in place enables both
identification of affected devices and automatic deactivation
if parameters are changed.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This moves the FFF configuration from
/etc/config/system to a new file /etc/config/fff. Thus,
this file can be copied as a whole during upgrade (with
compatibility provided) and then resulting values in
other files are re-set later.

This also fixes the bandwidth settings not being persistent
during upgrade. Other settings may join ...

I tried to go through all the code and update all occurrences
of the relevant system variables (looking for "system" both
in GitHub and my local src folder).

Note that a downgrade will result in loss of configuration!

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This patch introduced more detailed information about the
hood in the WebUI, i.e. channel and SSIDs.

The patch includes a reorganization of the columns.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-By: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

This adds missing ROUTERMAC variable for CPE510

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Using wifi devices makes it possible to get mac address
without having to configure wifi networks.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-By: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
- Increment package version
Signed-off-by: Tim Niemeyer <tim@tn-x.org>

During system boot, the dependency of alfred to the bat0
interface is problematic. In some circumstances (no eth mesh
and no wifi mesh), the mesh interfaces are disabled, the
bat0 interface is removed and the station mode is entered.

Because alfred is started after the station mode (current
boot order), it doesn't start up with the missing bat0 interface.

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Some JSON beautifiers put spaces between identifier and value.
This is necessary to tolerate that.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This makes use of the SWITCHDEV variable to ensure that the
correct interface is used for mac address fixing on devices,
that do not use eth0 for the switch.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Prepares a subtarget variable for cases where it is not 'generic'

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Move the variable definition to the implementation file. This is more
intuitive and the variable is not used otherwise.

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

We only want to remove WiFi interfaces, not devices during
reconfiguration. This still allows for complete reconfiguration,
but does not remove device attributes like a disabled 5 GHz or
similar.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Some MAC adresses were forgotten/not updated in a previous
patch. This is fixed now.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

This is based on the LEDE pull request as on 2017-10-17.

Tested successfully on device (including flashing factory
image, no TFTP).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This patch achieves multiple goals:
- Align WR841 boardnames with image names
- Fix wrong name replace in sysupgrade
- Support sysupgrade of WR841 v12

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>

This adds information to the switch port overview and shows
the VLAN configuration. For some routers the port order is
provided, so the physical arrangement is resembled in the
Web UI.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

This allows for more latitude when evaluating the addresses needed for br-mesh and ethmesh.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

The ROUTERMAC is not set in the network.* file. This causes a problem
when the ULA addresses are set based on the br-mesh MAC. If we just
add the ROUTERMAC, everything should be fine.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

This puts the code for creating IPv6 addresses from MAC
address and EUI into functions, so it can be reused.

This should be particularly helpful if code is rewritten later.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Since names may change, this puts the relevant file names for
hood files into variables, so they can be changed at once
without the risk of forgetting some occurrences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

While the hood file is only set by the keyexchange/hood, this
introduces a local additional configuration in a second file.
This file is retrieved from the first configap we got in w2sta
mode, of which we save the fdff address to identify it later.
Thus, a router always "knows" its specific uplink, as long as
the gateway connection is stable; otherwise: reset.

The implementation is similar to the hoodfiles with a tmp
version and a copy in the /www/public. On the "section head",
the initial configuration is located in /etc/sectorfile and
distributed from there to other nodes. Syntax should be like
the node file, except that it only contains the values to be
overwritten.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

This prevents setup if a channel is missing (json defective)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>