This fixes:
Makefile:27: *** missing separator.  Stop.

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

tcp timestamps can improve tcp performance a lot, especially
with unstable networks like wifi.

Linux default behaviour is enabled so the tcp timestamps setting
is removed from sysctl configuration.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

This Package adds a router advertisement daemon and
appropriate Freifunk Franken specific configuration for it.

The ra_default option is set to '2' to force the default flag,
even if no default route for ipv6 is present.
This is necessary, because otherwise fc00::/7 targets would be
unreachable, since odhcpd is unable to send specific routes inside a RA.
This won't affect clients ability to reach hosts which have a dual stack
connection, typical network stacks prefer IPv4 over IPv6 ULA when no
public IPv6 address is available.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Configuration of Router Advertisements is done in a seperate package.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

This device is still in PR state in OpenWrt, since ar71xx target
is deprecated and thus lacking reviewers.
It worked nicely for me anyway, so I include the current state of
the PR (has not changed for months).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

With our dynamic resetting of WiFi interfaces, the rssileds
of OpenWrt do not work correctly. This disables them as a
workaround, since they otherwise create about 20 % CPU load.

Since the MACH file for all CPE210/510 is the same, no adjustment
of the OpenWrt-tiny patch is needed.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

The proxy only sends data from alfred master to the Monitoring.
It does not require the device to produce alfred-data in the
nodewatcher itself.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

The wget from busybox we are using ignores the -t option,
although it does not throw errors in the currently used version.

However, specifying the -t option in calls where it is not used
is misleading, so it should be removed.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
- Convert configuration to uci
- Split IPv4 network rules to fff specific subnets
- Add IPv6 ULA network rules
- Change PKG_VERSION to single number versioning
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
- Removed "delete batman-adv.bat0"

Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

This improves the curl call by:
- Using full executable path
- Removing redundant -X POST
- Using --data-binary instead of --data

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

By using the alfred2 mechanism of the Monitoring, we get rid
of the embracing {"64":...} key-value construct.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

CC: kratz00@gmx.de
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed subject
- Changed curl parameters
- Added firewall rule
- Configure alfred to be master
- Add fff-nodewatcher as dep, because we use the alfred config
- Change data handling during curl to pipe
- Add newline on cron rule
Signed-off-by: Fabian Bläse <fabian@blaese.de>
- Fix alfred master mode introduced by packaging alfred
- Adjust monitoring-proxy waittime to suggestion
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed subject
- Move alfred-json to own repo
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Robert Langhammer <rlanghammer@web.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
- configure router advertisements
- fix package title
- remove unnecessary dhcp config on first boot
- lower lease time
- only commit dhcp uci section
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

This firewall blocks all communication with fe80::1 from a
Client to Batman and to the Node.

We need this because some crap devices (e.g. a wrongly
connected router on a clientport) have fe80::1 as address
and break our setup.

Signed-off-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

When using local hoodfile neither this nor central hoodfile
downloaded earlier should be offered to neighbours, so remove it
from the webroot.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Instead of overwriting local variable to local hoodfile location,
copy it to the commonly used location. This makes the local hoodfile
behave exactly like central hoodfiles, which prevents some border cases.

The previous behaviour mainly caused issues when using getJsonPath() and
getUpgradePath() from fff-hoodutils.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

This make it easier to use new targets without subtarget.

Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Based on the documentation, BLA will only help if two nodes
are connected via WiFi AND via Ethernet cable on CLIENT ports!
For a "correct" setup, e.g. WiFi and BATMAN port connection,
BLA won't have an effect.

Since the former case is possible and there are no known
drawbacks, we enable BLA.

This removes the line to disable BLA, so it will be enabled as
B.A.T.M.A.N. enables it by default.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

This shows the configured peers for fastd and L2TP.
Note that "configured" does not tell whether they are working.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Instead of manually overwriting basic and supported rates,
this patch makes use of a new OpenWRT option "legacy_rates",
which disables 802.11b data rates.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

So far, the Monitoring evaluates hoods based on their names.

This introduces several problems, most prominently a hood
re-creation if it is renamed at the KeyXchange.

Since we have unique hood IDs in the KeyXchange and the
Monitoring retrieves those via hoods.php, it is logical use this
information instead of relying on string comparison.

This requires the hood files to contain an additional field "id".
While this has not been implemented, the changes in this patch
will still work and just write empty data to the uci field and
alfred data.

For local hoods, the "id" in the hood file will remain unset.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

When setting up a node, router solicitations can be used to speed
up receiving router advertisements a lot. This mechanism has been
previously disabled by our custom sysctl config.

However because linux does not send router solicitations, if it
doesn't accept router advertisements, which is disabled for every
link except WAN, this option can safely be set to it's default value
for all interfaces.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Since the MacNocker was introduced, the hood information in
UCI is DELETED if the hood is lost.

If the router still successfully sends alfred data in this state,
the Monitoring will treat it as a V1 device. This is annoying,
especially since it looks like a loop.

An easy solution is to send an empty <hood> field in those cases,
as V2 routers are detected by them knowing their hood.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This sysfs option no longer exists.

The no_rebroadcast option was used as part of gluon’s
batman-adv-legacy implementation, after open-mesh decided
to not include it into batman-adv v14:

https://patchwork.open-mesh.org/patch/3434/

Our firmware has included (and enabled) it since December 2013.

With the upgrade to batman-adv v15 (pulled from openwrt-routing
then) in October 2017, the custom patch was no longer included.
It looks like open-mesh provides an equivalent built-in
solution now:

https://git.open-mesh.org/batman-adv.git/commit/a00797d8fa8fd1471e8be1ac23d506f76d866aaa



Thus, the option can be removed.

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

The "ipv4" option is used to enforce using ipv4 when
using dns for fastd remotes.
However this option was incorrectly always set which
makes ipv6 connections impossible.
Because enforcing ipv4 is not necessary, this option
is removed.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>

This is based on the configurehood-Patch from Tim Niemeyer.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

This is based on a similar patch from Tim Niemeyer.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Instead of having 1000 routers accessing the KeyXchange in the
same second, this will dilute the request within a period of
15 seconds.

Same is done for queries from gateways.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

The V2 firmware requires initialization of the WiFi interfaces
by a hood file. If a one-port (or two-port) device is isolated,
it won't get this information from other WiFi nodes (w2sta mode).

In addition, it cannot be connected to the internet, as this would
require the port to be in WAN mode. It is also not possible to
connect a client device for configuration, since WiFi is not
configured and the LAN port is in BATMAN mode.

To enable configuration of an isolated one-port/two-port device,
this patch thus changes the default port config to CLIENT, so
the user can choose the desired configuration more easily.

For two-port, we will have one port WAN and the second port
CLIENT.

Fixes #110

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Harald Thuemmler <int@bnhof.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

The previous version seemed to work only for numeric data.

Fixes #113

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

nodewatcher and configurehood have both been run with */5 in micrond.

This may lead to nodewatcher accessing information just being
changed by configurehood. To prevent this, we just change the
start of configurehood, as this has no known disadvantages.

A change of the nodewatcher start would also solve the problem,
but nodewatcher is synchronized to the alfred-master and the
Monitoring.

Fixes #96.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Set PKG_RELEASE back to 1]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

The syntax " -m state --state " seems to be not supported anymore.

The replace should not change behavior compared to
lede-17.01-based firmware.

Added required dependency.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>