By removing the reference to the hood file from vpn-select, we
remove the entire dependency from fff-hoodutils.
vpn-select will now work with any file provided, as long as
it has the correct syntax. At the moment, the only provider
is the configurehood script. Since the various hood file variants
are handled there, it seems logical that configurehood also
chooses and provides the correct hood file for vpn-select, instead
of vpn-select which had no other contact with hood file choice.

This is simple, tidy and effective.

Adjusted some comments.

Fixes #106

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Remove double square bracket. [[ is a bash or ksh built-in, and cannot be used in a #!/bin/sh script.

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

== is a bash specific alias for = , and
should not be used in #!/bin/sh scripts. Not in #!/usr/bin/haserl scripts
either, where the shell defaults to /bin/sh.

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>

This is simpler than the previous approach and does not rely
on parsing.

This fixes:
- Interfaces being accounted for multiple times for certain
  devices
- Errors when output of bridge function changes (as with the
  current OpenWrt master)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

This patch suppresses the messages batman writes to
the kernel log when gw_mode is changed. This is done
to avoid spamming the log with negligible messages
when gw_mode is switched frequently.

Fixes: #93

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Timestamps in hood file currently only change if changes are
made. Thus, there is no reason to remove them for comparison.

This also fixes the wrong quote characters in the script, which
changed the script in a way the timestamps aren't removed right
now anyway.

After this change, a hood reconfiguration may be triggered by
just changing the timestamp at the keyxchange.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

With this patch, changing the hood file happens in
memory, so we do not have to write on flash "frequently".

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This will copy to hoodfilewww every 5 minutes!

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

At the moment, we use the same file for detecting changes in a
new hood file and for broadcasting the hood information to be used
by mesh routers.

However, there may be situations where we don't want to broadcast
an existing hoodfile. We, on the other hand, cannot delete it
then, as we need the file for checking changes in the temporary
hoodfile.
We also cannot just switch the wXconfig state to achieve this
goal, as we need a trigger to do that (which is the same file we
are discussing about).

So, in this patch, we introduce two files, one for the checksum
comparison and one for the hood info broadcast. Those can now be
set and deleted (in a later patch) as it is required by their
respective tasks. This should also improve code clarity to the
reader ...

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

To provide data processing information for SSH access without
annoying users too much, this adds a pointer to more extensive
information to the banner displayed after login.

The referenced files then contain similar information to what
is shown in the WebUI.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This adds a first version of data processing information to the
Web UI's settings page (where the information is entered).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

According to the upstream repo, vis_mode has been removed since
batman-adv 2014.0.0.

See openwrt-routing/packages 8a66ed1.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

To reduce the number of possible corner cases
in the first keyxchangev2 release, this patch
removes the sector file with the intention to
add it back after release.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This patch allows to modify the bs-partition on the AC Mesh.

Without the patch, the bs partition on the AC Mesh is locked
forever. This can be a problem if
a) the bs partition has not been updated correctly during initial flash
b) the sysupgrade mechanism is altered by OpenWRT in order to account for
the flip flop layout

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Occationally /proc/net/if_inet6 contains interface IDs with
three digits. In this case, the regex in wait_for_ll_address()
does not work anymore and alfred is not starting.

This patch changes the evaluation so that fields are used instead
of the mere position by counting characters.

This is a backport from openwrt-routing and can be removed when
updating to OpenWRT 18.06, but not for newer versions of 17.01.

Fixes #98.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhgammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhgammer <rlanghammer@web.de>

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Fixes #95

This reverts commit 6cc6b4b7.

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Fixes #68

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>

Fixes #94

Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

In commit 5c1d3b1f, conditions were changed so that "wifi" is called
almost every run directly before the network status (internet vs.
gateway contact vs. wXsta).

This causes strange effects configurehood and nodewatcher, which is
called at the same time.

The fix only does "wifi" if required and waits 10 sec. after that.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Fixes #83
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>

Just disable autoconf.

Some sysctl's are currently not available due some missing kernel
features. Maybe some day they reappear.

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>

Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

The simplest and fasted way to
Fixes #72

Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Code which is reused by other functionalities is put into the
fff-hoodutils package, so it can be used without including
configurehood.

This also allows setting missing dependencies of other packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

This addresses a bunch of issues:
- Previously, only the presence of w2configap was checked. With
  only 5 GHz, this would have caused a recreation every 5 min.
  (Note that this is only valid for a 5 GHz only device, as we
  always create all interfaces for disabled radios)
- The two outer if-statements are merged
- We now check for presence of wXmesh to enable wXconfigap. Although
  this is no necessity (as the hood file contains the whole config)
  this assumes that a disabled wXmesh means no intent of the owner
  to connect to other devices on this radio.
- With the dependency of wXconfigap from wXmesh, this patch now
  enables the deactivation of hood file transmitting by disabling
  meshing in the hood file

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

Bug 1: If devices with hidden SSID are present, the matched
SSID in the awk contains the newline (="unknown\n\t"). This
destroys the table after the sort.

Bug 2: If SSIDs contain ampersands (yes, people do that),
they are now converted to &.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>

The actual calculation is done in the Monitoring.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>

Fixes: #71
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

This adds data about the clients per interface

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>

Since the reverted patch, device specific antenna gain is not set for some reason.
Reverting the patch in question fixes this issue.

THIS SHOULD BE ONLY CONSIDERD AS A TEMPORARY FIX UNTIL THE ISSUE IS FIXED PROPERLY!

Fixes: #85

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>